The EAE E25M is an independent two column vehicle lift engineered for garages, commercial workshops, and industrial facilities that need dependable, high-capacity lifting without the hassle of steel ropes or synchronized cabling. Its wireless synchronized hydraulic control system automatically corrects height variations during lifting cycles, keeping both columns perfectly level throughout every lift.

Rated to lift up to 5000kg, the E25M comfortably handles sedans, heavy-duty SUVs, pickup trucks, and vans, making it a versatile choice for busy Irish workshops and home garages alike.

Key Technical Specifications

• Lifting Capacity: 5.0T (5000kg)
• Max Lifting Height: 2000mm
• Min Height: 110mm
• Lifting Time: Approximately 25 seconds
• Motor: Dual power units, 3.5kW x 2
• Drive-Through Width: 2430–3130mm
• Inside Column Width: 2800–3500mm (recommended installation range)
• Overall Height: 2912mm
• Electricity Supply: Configured per customer requirements

Wireless, Independent Column Design

Unlike traditional two post lifts that rely on steel ropes for synchronization, the E25M uses a wireless synchronized hydraulic control system. Each column operates independently, reducing mechanical wear and simplifying installation, while the system automatically corrects any height variation between columns as it lifts.

Smart Control and Monitoring

The E25M features a touchscreen HMI display for real-time height monitoring and system setup, with an optional weight indicator available. A dedicated height limit switch and displacement sensor work alongside an intelligent control system to ensure accurate, consistent lifting on every cycle. All electrical operation runs on a 24V safe control system.

Built-In Safety Features

• Dual safety protection against hydraulic leakage via mechanical latch and anti-burst hydraulic valve
• Smart latch sensors that determine whether to lower directly or raise before descent
• Low-position stop with audible alarm for final travel
• Automatic engaging and disengaging swing arm locking device — engages when raised, disengages at the lowest position
• CE certified for compliance and peace of mind

Four 3-Stage Arms and Optional Type M Arms

The E25M is fitted with four 3-stage lifting arms as standard, offering flexible pickup point positioning for a wide range of vehicle types. For workshops handling vehicles with extended or unusual wheelbases, optional Type M Arms are available to extend wheelbase compatibility further.

Efficient, Low-Maintenance Motor

Powered by dual 3.5kW motors housed in an aluminium shell, the E25M dissipates heat rapidly for consistent performance even during repeated, heavy-duty use — delivering a full lift from bottom to top in approximately 25 seconds under rated load.

Who Is the EAE E25M For?

The E25M is suited to home users seeking a professional-grade home garage lift, as well as commercial garages and industrial workshops that need a durable, high-capacity two post lift for daily use. Its flexible installation width (recommended 2800–3500mm) allows it to be configured to suit a range of installation spaces.

Note: Max lifting height is measured with adjustable screw pads in the highest position. Product shown may include optional equipment; actual appearance may differ slightly.

Key Features

• Rated lifting capacity of 5000kg (5.0T) — suitable for sedans, heavy-duty SUVs, pickup trucks, and vans
• Wireless synchronized hydraulic control system with automatic height correction
• Independent columns — no steel ropes
• Maximum lift height of 2000mm for greater under-vehicle workspace
• Dual 3.5kW power units — full lift in approximately 25 seconds
• Touchscreen HMI display with optional weight indicator
• 24V safe control system
• Dual hydraulic safety protection (mechanical latch + anti-burst valve)
• Automatic swing arm locking device
• Four 3-stage arms, with optional Type M arms available
• CE certified
• Flexible installation width: 2800–3500mm recommended

Technical Specifications

* Machine shown with optional equipment. Actual product appearance may differ.
* Max. Lifting height is measured with adjustable screw pads in highest position.

As automotive service requirements evolve, workshop equipment must meet the precise demands of servicing electric and hybrid vehicles. The EAE MS10 EV battery lifting table is purpose-built to facilitate the safe removal, transportation, and installation of heavy EV battery packs, engines, gearboxes, drive axles, and suspension assemblies.

Versatile & Adjustable Mobile Lifting Table

Designed for maximum efficiency, the working table extends from 1305mm up to 1480mm in length to comfortably accommodate larger battery packs and long chassis components. Equipped with two independent precision screws controlled by T-handles, operators can easily tilt the working table to align perfectly with the mounting angle of the vehicle[cite: 1].

The top surface features a 100mm x 100mm grid of M10 threaded holes for attaching specialized component fixtures, alongside dedicated side mounting points for securing loads with straps

Smooth Pneumatic-Hydraulic Operation

Powered by a foot-activated pneumatic-driven hydraulic pump (operating at 6–8 bar air pressure), the EAE MS10 allows hands-free elevation up to a maximum lifting height of 1800mm. Premium hydraulic cylinders and high-grade seal rings ensure smooth, controlled movements, dynamically tested under 115% of rated load capacity

Durable Design for Irish Workshops

Built on an oversized base frame for optimal stability, this 1T mobile lift table features four heavy-duty, abrasion-resistant lockable casters for easy maneuverability across workshop floors. A durable powder-coated finish protects the unit against peeling and corrosion in demanding garage environments.

Key Features

• 1.0 Tonne Lifting Capacity: Engineered for heavy-duty lifting including EV battery packs, engines, gearboxes, drive axles, and suspension systems.

• Foot-Activated Pneumatic-Hydraulic Pump: Powered and controlled effortlessly via a foot-operated air-hydraulic pump (requires 6–8 bar air supply).

• Extendable & Tiltable Platform: Features a flexible table length extending from 1305mm to 1480mm and independent twin-screw tilt adjustment.

• Integrated Fixture Points: Includes a grid of 100mm x 100mm reserved mounting holes (104-M10) to secure specialized fixtures and side strap points for stable load fixing.

• Heavy-Duty Mobility: Fitted with four robust, abrasion-resistant lockable casters for smooth maneuverability and secure positioning.

• Maximum Stability & Safety: Dynamic overload tested to 115% of rated capacity with high-quality seals, cylinders, and a wide base frame.

Technical Specifications

* Machine shown with optional equipment. Actual product appearance may differ.

The EAE EE-62C 4.2T Two Post Lift  stands out as one of the most adaptable vehicle lifts on the market. Its "clear floor" design keeps the workspace between columns free of obstructions, making it easier to move toolboxes and oil drainers under the vehicle. One of its primary advantages is the flexible installation options; technicians can choose between a Symmetric or Asymmetric setup depending on the specific space requirements of their workshop.

Furthermore, the EE-62C offers adjustable installation heights. You can set the total height at either 3867mm or 4300mm, allowing you to maximize your vertical space and accommodate taller vehicles with ease. This flexibility ensures the lift grows with your business needs.

Advanced Safety and Protective Features

Safety is at the core of the EAE EE-62C design. It is fully CE certified and features a range of protective measures to safeguard both the technician and the vehicle. The integrated vehicle roof protective device prevents accidental damage to taller vehicles, while the 24V control system ensures safe operation at all times.

• Automatic Arm Locks: Arm locks engage and disengage automatically for secure positioning.
• Mechanical Safety: Includes mechanical locks and crash valves for additional layers of safety.
• Door Protection: Standard door protection pads are included to prevent scratches and dents during entry and exit.
• Aluminum Motor: High-efficiency motor designed to avoid overheating and ensure a long service life.

Robust Arm Structure and Technical Specifications

This lift is engineered for heavy use with a strong carriage and arm structure. It utilizes a combination of 3-stage short arms and 2-stage long arms, providing the reach necessary to lift various vehicle types safely and efficiently. The 100mm extensions further enhance the lift's ability to reach difficult pick-up points.

Key Product Features

• 4,200kg Lifting Capacity: Engineered with a robust 4.2-tonne capacity, making it the ideal professional solution for passenger cars, SUVs, and light commercial vehicles.
• Flexible Installation Height: Designed with an adjustable overall height of either 3867mm or 4300mm, allowing for a custom fit based on your workshop's ceiling clearance.
• Symmetric or Asymmetric Setup: Features a versatile design that can be installed in either a symmetric or asymmetric configuration without the need for additional spare parts.
• Clear Floor Workspace: The overhead bar configuration provides a completely unobstructed floor between columns, allowing for the easy movement of toolboxes and oil drainers.
• Advanced 3-Stage Arm Reach: Equipped with 3-stage short arms and 2-stage long arms to safely and precisely reach the lifting points of various vehicle wheelbases.
• Integrated Roof Protection: Includes a vehicle roof protective device that automatically stops the lift to prevent overhead damage to taller vehicles.

• Dual Safety Systems: Utilizes automatic arm locks combined with mechanical locks and crash valves for maximum operator and vehicle security during every lift.
• Industrial 24 Volt Control System: Features a professional 24V control box for safe, intuitive operation in busy Irish garage environments.
• Enhanced Cylinder Protection: Durable cylinders in each column are supported by chain protection systems and derailment prevention for long-term reliability.

• Heavy-Duty Aluminum Motor: Standard high-performance aluminum motor housing avoids overheating and ensures a long service life under constant use.
• Standard Door Protection: Fitted with door protection pads to prevent accidental contact damage when entering or exiting vehicles on the lift.

• CE Certified: Fully compliant with European safety and quality standards for professional workshop use.
• Industry-Leading Warranty: Supported by EAE’s 5/2/2 warranty program, covering the structure, hydraulics, and electrical components.

The EAE 62C-60T is the ultimate solution for professional vehicle service centers requiring superior lifting strength. Boasting a 6,000kg (6T) capacity, this lift is built to handle heavy-duty commercial vehicles, armored cars, and large transport vans with ease. Its clear-floor design provides an unobstructed workspace, allowing technicians to move oil drainers, transmission jacks, and tool trolleys freely under the raised vehicle.

Advanced Safety and Heavy-Duty Engineering

Safety and durability are at the core of the 62C-60T design. The lift features a heavy-duty carriage and reinforced arm structure to manage maximum loads securely. It is equipped with automatic arm locks that engage and disengage seamlessly, along with a vehicle roof protective device to prevent overhead damage. The high-performance aluminum motor is engineered to prevent overheating during intensive use, ensuring long-term reliability in a busy workshop environment.

Durable Construction for Irish Workshops

Built to withstand the rigors of industrial applications, the EAE 62C-60T features a durable powder-coated finish and standard door protection pads. The 24V control system is housed in a sealed unit for maximum electrical safety. Fully CE certified and backed by a comprehensive 5/2/2 warranty, this lift offers Irish garage owners peace of mind and professional-grade performance.

Key Product Features

• 6,000kg Lifting Capacity: Superior heavy-duty lifting power specifically engineered for large commercial vans and industrial vehicles.
• Clear Floor Design: Provides an unobstructed workspace, allowing for the easy movement of maintenance equipment under the raised vehicle.
• Extended Overall Height: A total height of 5051mm to accommodate taller commercial vehicles and high-roof vans.
• Industrial Strength Arms: Features a 3-stage short arm and 3-stage long arm configuration as standard for maximum reach and flexibility.
• Advanced Safety Systems: Equipped with mechanical locks, anti-surge valves, and crash valves to provide professional-grade security.
• Automatic Arm Locks: Safety locks engage and disengage automatically during operation to ensure vehicle stability.
• Overhead Protection: Includes a dedicated vehicle roof protective device to prevent accidental damage to taller vehicles.
• Heavy Duty Construction: Built with a reinforced heavy-duty carriage and arm structure for long-term durability in high-volume workshops.
• High-Performance Motor: Features a standard aluminum motor designed to prevent overheating during intensive use.
• Professional Finish: Coated in a durable powder finish with standard door protection pads to safeguard customer vehicles.
• Low Profile Access: A minimum lifting height of 110mm allows the hoist to accommodate vehicles with lower ground clearance.
• Certified Quality: Fully CE certified for use in Ireland and backed by a 5/2/2 year warranty program.

Why Upgrade to the 6-Tonne Model?

• Superior Lifting Capacity: The 62C-60T provides a massive 6,000kg (6T) capacity, offering an additional 1,000kg of lifting power for heavy-duty commercial applications.
• Increased Vertical Clearance: At 5051mm, the 6-Tonne model is exactly 600mm taller than the 5T version, making it the ideal choice for high-roof commercial vans
• Optimized Drive-Through Space: The 6-Tonne version offers a wider drive-through width of 3025mm to better accommodate broader commercial vehicle chassis.
• Versatile Precision Lifting: Despite the high capacity, both models maintain a low 110mm minimum height, ensuring they can safely service standard passenger cars and SUVs alongside heavy machinery.
• Engineered Lifting Performance: The 6T model features a controlled lifting time of approximately 55 seconds to manage heavier industrial loads securely.

The EAE EE-6503 is built to provide reliable lifting for passenger cars and light commercial vehicles with a 3,500kg capacity. Its robust design features a heavy-duty scissor structure and extendable platforms on one side, allowing it to safely accommodate vehicles of varying wheelbases. With a maximum lifting height of 2130mm, it offers technicians ample vertical space for comfortable under-vehicle access.

Advanced Safety and Precision Engineering

Safety is integrated into every component of the EE-6503. The lift is equipped with an infrared level protection system to ensure perfectly synchronized platform movement. For mechanical security, it utilizes pneumatic released safety locks and durable cylinders in each column fitted with anti-surge valves. A safety descent alarming buzzer and a max height limit switch come standard to protect both the operator and the vehicle.

Efficient Design for Modern Workshops

Designed for high-productivity environments, the EE-6503 features a fast lifting time of approximately 40 seconds. The 24V control system is housed in a professional console, ensuring safe and intuitive operation. To ensure a long service life in busy Irish workshops, the unit is finished with a durable powder coating and features self-lubricated bushings and bearings.

Key Product Features

• 3,500kg Lifting Capacity: Engineered with a robust 3.5-tonne capacity, making it the ideal professional solution for passenger cars and light commercial vehicles

• Space-Saving Recessed Installation: Designed specifically for in-ground recessed mounting, providing a completely flush workshop floor when the lift is fully lowered

• High-Rise Vertical Clearance: Delivers a maximum lifting height of 2130mm, ensuring technicians have ample space for comfortable and efficient under-vehicle maintenance

• Extendable One-Side Platforms: Features flexible platforms that extend from 1550mm to 1990mm, allowing your workshop to safely service vehicles with varying wheelbases

• Infrared Level Protection: Equipped with an advanced infrared synchronization system to ensure both platforms remain perfectly level during every lift

• Dual Safety Locking System: Utilizes pneumatic released mechanical safety locks combined with crash valves for maximum operator and vehicle security

• Anti-Surge Protection: Each high-quality cylinder is fitted with anti-surge valves to prevent accidental rapid descent in the event of a hydraulic failure

• Industrial 24 Volt Control System: Features a professional-grade 24V control box for safe, intuitive operation in busy Irish workshop environments

• Safety Alarm & Limit Switches: Includes a built-in safety descent alarming buzzer and a max height limit switch to prevent overhead or operator accidents

• Durable Maintenance-Free Build: Constructed with self-lubricated bushings, high-quality bearings, and a durable powder-coated finish for a long, reliable service life

• CE Certified: Fully compliant with European safety and quality standards.

• Warranty: Supported by EAE’s 5/2/2 warranty program for long-term reliability.

The EAE EE-6501 is designed to provide maximum efficiency and safety in busy commercial garages and industrial workshops[cite: 225, 234]. Its low-profile 105mm starting height makes it an excellent choice for surface mounting, allowing easy access for vehicles with low ground clearance[cite: 230, 236]. When fully extended, it reaches a maximum lifting height of 2000mm, giving technicians ample space for under-chassis maintenance.

Key Product Features

• 3,500kg Lifting Capacity: Robust 3.5-tonne capacity ideal for passenger cars and light commercial vehicles.
• Extendable Platforms: Drive-on ramps can be locked as platform extensions, reaching a maximum length of 2300mm to accommodate various wheelbases.
• Low Profile Design: A minimum height of only 105mm makes it perfect for surface mounting and low-clearance vehicles.
• Reliable Levelling System: Equipped with a reliable automatic-levelling system to ensure platform synchronization during every lift.
• Dual Safety Locking: Features mechanical safety locks and crash valves for maximum operator protection.

• Industrial 24 Volt Control System: Professional 24V control box ensures safe and intuitive operation in the workshop.
• Electrical Lock Release: Convenient electrical release of mechanical locks for smooth lowering operation.
• CE Certified: Fully compliant with European safety and quality standards.
• Warranty: Supported by EAE’s 5/2/2 warranty program for long-term reliability and peace of mind.

The EAE EE-62B 5T is the powerhouse of the 62B series, offering a massive 5,000kg lifting capacity. Specifically designed for commercial garages and industrial workshops across Ireland, this lift is built to handle heavy-duty vans, 4x4s, and light commercial vehicles with ease and stability.

This model utilizes a base-plate design, making it a versatile choice for facilities that require high-capacity lifting without the need for high-clearance overhead beams. Supported by an industry-leading 5-year warranty, it is a long-term investment in your workshop's productivity.

Engineered for Strength and Versatility

The 5T model is equipped with Three-Stage Arms, providing a significantly wider range of reach to accommodate diverse vehicle wheelbases. The reinforced carriage and arm structure ensure that even the heaviest loads are lifted with maximum rigidity and safety.

Key Product Features

• High Capacity: Robust 5.0T lifting capacity for heavy commercial applications.

• Premium Safety: Features mechanical locks and crash valves to provide additional safety during operation.

• Efficiency: Fast lifting time of 45 seconds to keep your workshop moving.

• Durabilty: Durable powder coating and aluminum motor housing for long service life.

• Ease of Use: Simple 24 Volt control system for operator safety and convenience.

• CE Certified: Fully compliant with European safety and quality standards.

• Warranty: Supported by EAE’s 5/2/2 warranty program for long-term reliability.

The EAE EE-62B 4.2T is a heavy-duty, base-plate vehicle lift designed specifically for Irish garages and workshops where ceiling height is a factor. Combining a robust 4,200kg lifting capacity with a space-saving design, this lift is the perfect solution for servicing everything from compact cars to larger SUVs.

Built for longevity and safety, the EE-62B features a high-performance aluminum motor to prevent overheating during busy shifts. With its 24-volt control system and CE certification, it provides a reliable and secure environment for any professional technician or serious home enthusiast.

Advanced Engineering and Safety Features

The EAE 4.2T model stands out with its unique arm configuration, featuring 3-stage short arms and 2-stage long arms. This allows for precise positioning on various vehicle wheelbases. Safety is paramount, with mechanical locks and anti-surge valves integrated into the durable cylinders in each column.

Key Product Features

• Base Plate Design: Ideal for workshops and garages with low ceilings.

• Automatic Arm Locks: Locks engage and disengage automatically for seamless operation.

• Protection: Includes standard door protection pads to prevent vehicle damage.

• Screw-up Pads: Features round screw-up lifting pads with a clearance of less than 100mm.

• Chain Support: Integrated chain support with derailment protection for added peace of mind.

• CE Certified: Fully compliant with European safety and quality standards.

• Warranty: Supported by EAE’s 5/2/2 warranty program for long-term reliability.

The EAE MR35 3.5T Mid Rise Scissor Lift is the ultimate tool for high-turnover service environments. Its mobile design allows workshop owners to optimize floor space in narrow bays by repositioning the unit as needed. With the optional mobile kit, moving the lift around your garage becomes effortless, providing a level of versatility that fixed lifts simply cannot match.

Advanced Safety and Control Systems

Safety is integrated into every component of the MR35. It features an electrical released safety locking system and durable cylinders equipped with anti-surge valves. The 24V control system and height limit switch provide precision operation, while the safeguard against one-end tilting ensures the vehicle remains stable, even when driven on from either side.

Engineered for Longevity and Performance

Built to withstand the rigors of industrial workshops, the MR35 utilizes self-lubricated bushings and bearings to reduce maintenance requirements. The standard aluminum motor is designed to prevent overheating during consistent use, and the entire unit is finished with a durable powder coating to resist the wear and tear of a professional environment.

Smart Design Features

The MR35 includes a starting-up plate that assists with easy raising from the lowest point, even with heavier loads. To accommodate longer vehicles, the drive-up ramps lock securely into position, acting as platform extensions. This lift is CE Certified, ensuring it meets the highest safety standards for the Irish and Northern Irish markets.

Key Product Features

• 3.5T Lifting Capacity: Robust 3500kg capacity suitable for a wide range of passenger vehicles and SUVs.

• Mobile Design: Ideal for narrow bays and workshops requiring a portable lifting solution.

• Rapid Lifting: Accomplishes a full 1000mm rise in approximately 30 seconds for fast service turnaround.

• Starting-Up Plate: Integrated mechanical aid for easy raising from the lowest 110mm point.

• Adjustable Platform: Drive-on ramps lock into place to extend the platform length up to 2028mm for longer vehicles.

• Safety First: Equipped with an electrical safety lock release, anti-surge valves, and tilt protection.

• Industrial Build: Features an aluminum motor to prevent overheating and self-lubricating bearings for reduced maintenance.

• Versatile Entry: Safeguard against one-end tilting allows vehicles to be driven onto the lift from either side.

• CE Certified: Fully compliant with European safety and quality standards.

• Warranty: Supported by EAE’s 5/2/2 warranty program for long-term reliability.

The EAE 62C-50T is built to handle the demanding requirements of professional vehicle service centers. With a 5,000kg (5T) lifting capacity, this hoist is specifically designed to accommodate heavier vehicles, including large passenger cars, SUVs, and light commercial vehicles. The clear floor design allows for the easy movement of oil drainers, tool trolleys, and transmission jacks directly under the raised vehicle.

Robust Safety and Engineering Features

Safety is a standard feature of the 62C-50T. It includes automatic arm locks that engage and disengage seamlessly, along with a vehicle roof protective device to prevent overhead damage. The lift is powered by a high-performance aluminum motor designed to avoid overheating during heavy use, ensuring a long and reliable service life.

Durable Design and Finish

To withstand the rigors of a busy Irish workshop, the EAE 62C-50T features a durable powder coating and standard door protection pads to prevent damage to customer vehicles. The unit is CE certificated and includes a 24V control box with rubber gasket sealing for maximum reliability.

Key Product Features

• 5,000kg Capacity: Heavy-duty lifting power suitable for large SUVs and commercial vehicles.

• Clear Floor Design: Provides an unobstructed workspace for maintenance equipment and technicians.

• Fast Operation: Efficient lifting time of approximately 35 seconds to keep your workshop moving.

• Enhanced Arm Reach: Features 3-stage short arms and 2-stage long arms for flexible vehicle positioning.

• Safety First: Includes a roof protection device, anti-surge valves, and automatic arm locks.

• Vehicle Protection: Includes standard door pads and a roof protection sensor to prevent accidental damage.

• Overload Protection: Pre-set hydraulic pressure prevents overloading for safer operation.

• Robust Construction: Features durable cylinders in each column and a standard aluminum motor to prevent overheating.

• CE Certified: Fully compliant with European safety and quality standards.

• Warranty: Supported by EAE’s 5/2/2 warranty program for long-term reliability.

Why the 5-Tonne Model is the Workshop Standard

• Versatile 5,000kg Capacity: The 62C-50T is perfectly balanced for a mix of large passenger SUVs and light commercial vehicles.
• Faster Cycle Times: With a lifting time of approximately 35 seconds, the 5T model offers increased workshop throughput for high-volume service centers.
• Compact Vertical Profile: At 4451mm tall, this model is ideal for workshops with standard ceiling heights that still require heavy-lifting capabilities.
• Precision Engineering: Features 3-stage arms and a low 110mm minimum height to handle everything from low-clearance cars to light vans.
• Reliable Industrial Build: Includes a durable aluminum motor and 24V control system as standard for safe, all-day operation.