The EAE E25M is an independent two column vehicle lift engineered for garages, commercial workshops, and industrial facilities that need dependable, high-capacity lifting without the hassle of steel ropes or synchronized cabling. Its wireless synchronized hydraulic control system automatically corrects height variations during lifting cycles, keeping both columns perfectly level throughout every lift.

Rated to lift up to 5000kg, the E25M comfortably handles sedans, heavy-duty SUVs, pickup trucks, and vans, making it a versatile choice for busy Irish workshops and home garages alike.

Key Technical Specifications

• Lifting Capacity: 5.0T (5000kg)
• Max Lifting Height: 2000mm
• Min Height: 110mm
• Lifting Time: Approximately 25 seconds
• Motor: Dual power units, 3.5kW x 2
• Drive-Through Width: 2430–3130mm
• Inside Column Width: 2800–3500mm (recommended installation range)
• Overall Height: 2912mm
• Electricity Supply: Configured per customer requirements

Wireless, Independent Column Design

Unlike traditional two post lifts that rely on steel ropes for synchronization, the E25M uses a wireless synchronized hydraulic control system. Each column operates independently, reducing mechanical wear and simplifying installation, while the system automatically corrects any height variation between columns as it lifts.

Smart Control and Monitoring

The E25M features a touchscreen HMI display for real-time height monitoring and system setup, with an optional weight indicator available. A dedicated height limit switch and displacement sensor work alongside an intelligent control system to ensure accurate, consistent lifting on every cycle. All electrical operation runs on a 24V safe control system.

Built-In Safety Features

• Dual safety protection against hydraulic leakage via mechanical latch and anti-burst hydraulic valve
• Smart latch sensors that determine whether to lower directly or raise before descent
• Low-position stop with audible alarm for final travel
• Automatic engaging and disengaging swing arm locking device — engages when raised, disengages at the lowest position
• CE certified for compliance and peace of mind

Four 3-Stage Arms and Optional Type M Arms

The E25M is fitted with four 3-stage lifting arms as standard, offering flexible pickup point positioning for a wide range of vehicle types. For workshops handling vehicles with extended or unusual wheelbases, optional Type M Arms are available to extend wheelbase compatibility further.

Efficient, Low-Maintenance Motor

Powered by dual 3.5kW motors housed in an aluminium shell, the E25M dissipates heat rapidly for consistent performance even during repeated, heavy-duty use — delivering a full lift from bottom to top in approximately 25 seconds under rated load.

Who Is the EAE E25M For?

The E25M is suited to home users seeking a professional-grade home garage lift, as well as commercial garages and industrial workshops that need a durable, high-capacity two post lift for daily use. Its flexible installation width (recommended 2800–3500mm) allows it to be configured to suit a range of installation spaces.

Note: Max lifting height is measured with adjustable screw pads in the highest position. Product shown may include optional equipment; actual appearance may differ slightly.

Key Features

• Rated lifting capacity of 5000kg (5.0T) — suitable for sedans, heavy-duty SUVs, pickup trucks, and vans
• Wireless synchronized hydraulic control system with automatic height correction
• Independent columns — no steel ropes
• Maximum lift height of 2000mm for greater under-vehicle workspace
• Dual 3.5kW power units — full lift in approximately 25 seconds
• Touchscreen HMI display with optional weight indicator
• 24V safe control system
• Dual hydraulic safety protection (mechanical latch + anti-burst valve)
• Automatic swing arm locking device
• Four 3-stage arms, with optional Type M arms available
• CE certified
• Flexible installation width: 2800–3500mm recommended

Technical Specifications

* Machine shown with optional equipment. Actual product appearance may differ.
* Max. Lifting height is measured with adjustable screw pads in highest position.

As automotive service requirements evolve, workshop equipment must meet the precise demands of servicing electric and hybrid vehicles. The EAE MS10 EV battery lifting table is purpose-built to facilitate the safe removal, transportation, and installation of heavy EV battery packs, engines, gearboxes, drive axles, and suspension assemblies.

Versatile & Adjustable Mobile Lifting Table

Designed for maximum efficiency, the working table extends from 1305mm up to 1480mm in length to comfortably accommodate larger battery packs and long chassis components. Equipped with two independent precision screws controlled by T-handles, operators can easily tilt the working table to align perfectly with the mounting angle of the vehicle[cite: 1].

The top surface features a 100mm x 100mm grid of M10 threaded holes for attaching specialized component fixtures, alongside dedicated side mounting points for securing loads with straps

Smooth Pneumatic-Hydraulic Operation

Powered by a foot-activated pneumatic-driven hydraulic pump (operating at 6–8 bar air pressure), the EAE MS10 allows hands-free elevation up to a maximum lifting height of 1800mm. Premium hydraulic cylinders and high-grade seal rings ensure smooth, controlled movements, dynamically tested under 115% of rated load capacity

Durable Design for Irish Workshops

Built on an oversized base frame for optimal stability, this 1T mobile lift table features four heavy-duty, abrasion-resistant lockable casters for easy maneuverability across workshop floors. A durable powder-coated finish protects the unit against peeling and corrosion in demanding garage environments.

Key Features

• 1.0 Tonne Lifting Capacity: Engineered for heavy-duty lifting including EV battery packs, engines, gearboxes, drive axles, and suspension systems.

• Foot-Activated Pneumatic-Hydraulic Pump: Powered and controlled effortlessly via a foot-operated air-hydraulic pump (requires 6–8 bar air supply).

• Extendable & Tiltable Platform: Features a flexible table length extending from 1305mm to 1480mm and independent twin-screw tilt adjustment.

• Integrated Fixture Points: Includes a grid of 100mm x 100mm reserved mounting holes (104-M10) to secure specialized fixtures and side strap points for stable load fixing.

• Heavy-Duty Mobility: Fitted with four robust, abrasion-resistant lockable casters for smooth maneuverability and secure positioning.

• Maximum Stability & Safety: Dynamic overload tested to 115% of rated capacity with high-quality seals, cylinders, and a wide base frame.

Technical Specifications

* Machine shown with optional equipment. Actual product appearance may differ.

The AC Hydraulic FJ40 stands out as a high-capacity, versatile lifting tool engineered specifically to meet the demanding requirements of forklift maintenance, farm machinery repair, and industrial logistics. With its dual-height capabilities, operators can seamlessly transition between a 4,000 kg scissor lift and a 5,000 kg cylinder point-lift, ensuring absolute flexibility on the workshop floor.

Ultra-Low Profile for Maximum Accessibility

Modern industrial forklifts often present extreme clearance challenges. The FJ40 addresses this with an incredibly low minimum height of just 55 mm on the scissor mechanism. This allows mechanics to slide the jack effortlessly under the lowest pick-up points without damaging the machinery bodywork. For alternative lifting points, the high-performance cylinder starts at a minimum height of 410 mm, offering dual-zone versatility.

Built for Rigorous Commercial and Industrial Use

Manufactured from top-tier, high-strength structural steel, the wide and robust chassis prevents twisting or flexing under load. Its unique foldable design makes it a space-saving asset within tight workshop layouts and allows it to be neatly stowed away in mobile field service trucks for on-site agricultural breakdowns.

Uncompromising Safety and Precision Control

When dealing with multi-tonne payloads, safety is paramount. The AC Hydraulic FJ40 incorporates an advanced internal safety overload valve that prevents the jack from operating beyond its designated threshold. Lowering operations are handled with precise, micro-adjustable controls, eliminating sudden drops and allowing components to be lined up safely and securely during assembly or repair work.

Technical Specifications

In modern commercial garages, safety and efficiency are paramount. The AC Hydraulic WTA500 Commercial Wheel Trolley is expertly engineered in Denmark to eliminate heavy lifting risks and streamline operations during tire changes, brake service, and hub maintenance. Capable of handling loads up to 0.5 tonnes, this versatile workshop tool is an indispensable asset for commercial mechanics dealing with vans, heavy goods vehicles (HGVs), coaches, and buses.

Advanced Ergonomics & Efficient One-Man Operation

Handling large commercial wheels manually is a multi-person job that carries significant workplace injury risks. The WTA500 transforms this into a straightforward, single-operator task. The integration of a high-efficiency hydraulic foot-pump lets the technician use their body weight to raise the load smoothly while keeping both hands completely free to guide, stabilize, or secure the tire. Additionally, the lifting arms feature integrated roller bearings so the technician can easily spin heavy tires to align the stud holes perfectly with the vehicle's hub assembly.

Built to Last on the Tough Irish Workshop Floor

Constructed with high-grade European steel and finished with a durable, corrosion-resistant protective coating, the AC Hydraulic WTA500 is engineered to withstand daily, heavy-duty industrial environments. For secure transportation across the bay, the trolley features an integrated retaining bracket that locks the wheel firmly in place, avoiding accidental tipping. Mobile versatility is guaranteed by four industrial nylon castor wheels that navigate over grates, expansion joints, and uneven workshop floors seamlessly.

Highly Versatile with Wide Compatibility Range

Whether you are servicing a light commercial delivery van or a multi-axle transit bus, the WTA500 offers the flexibility required for a diverse fleet. The adjustable lifting arms slide easily to accommodate tire diameters ranging from 270 mm to 1300 mm. With a low minimum clearance height of just 160 mm and a high lifting reach of 710 mm, it provides exceptional clearance when extracting wheels off heavy vehicle axles or lifting them directly onto tire changing machines.

Technical Specifications

The AC Hydraulic DK60Q represents the gold standard in heavy vehicle lifting, specifically engineered to satisfy the demands of fleet managers, heavy transport mechanics, and agricultural engineers throughout Ireland. Delivering a true 6.0 tonne (6,000 kg) capacity, this industrial trolley jack is perfectly optimized to elevate heavy-duty commercial trucks, municipal transit fleets, modern farm tractors, and rugged contractors' earthmoving plant. Its wide, robust frame is welded from high-strength structural steel, providing a completely rigid platform that eliminates frame distortion or flexing under the most severe loads.

Low Profile Entry and High Lift Clearance Range

Managing diverse commercial vehicle weights requires versatile workshop floor equipment. The AC Hydraulic DK60Q features a low minimum profile height of just 140 mm, which allows it to glide seamlessly beneath low-slung commercial axles, heavy machinery trailers, and agricultural hitch points. The integrated high-pressure hydraulic unit extends smoothly to provide a maximum height of 600 mm. This expansive vertical reach provides workshop technicians with ample space to carry out safe brake overhauls, heavy wheel changes, suspension rebuilds, and general undercarriage servicing.

Advanced Manual Safety Controls and Failure Prevention

When operating under 6-tonne industrial loads, uncompromising workshop safety is a strict necessity. The DK60Q is engineered with a high-accuracy manual dead man's release valve within the steering handle assembly, granting operators total control over the lowering speed. This mechanism prevents sudden or hazardous vehicle drops, ensuring smooth, controlled descent. Furthermore, a built-in safety overload valve completely blocks the lifting stroke if the load surpasses the 6,000 kg certified parameter, keeping your team and your workshop assets completely safe.

Ergonomic Layout and Rapid Vehicle Engagement

To optimize workflow speed inside commercial workshops and transport bays, the DK60Q incorporates a high-efficiency quick-lift foot pedal. This feature raises the heavy-duty lifting saddle up into contact with the vehicle chassis lifting point instantly, saving valuable time and removing the need for manual handle strokes before engaging the weight. The ergonomically designed 1200 mm handle ensures a firm, non-slip grip, making the 95 kg chassis highly manoeuvrable and remarkably straightforward to direct across uneven workshop surfaces or tightly packed bays.

Unmatched Danish Engineering Built for Hard Work

Proudly designed, tested, and manufactured in Viborg, Denmark, the AC Hydraulic DK60Q floor jack is built strictly from premium-grade steel and premium industrial seal kits. It features a hard-chromium plated hydraulic ram to offer maximum protection against corrosion, chemical spills, and wear. For commercial garages that regularly manage field repairs or operate on unpaved gravel forecourts, the chassis frame can be easily upgraded with optional pneumatic tyres to maximize smooth transit across any demanding outdoor terrain.

Frequently Asked Questions (FAQ)

Is the 6-tonne capacity of the DK60Q certified for industrial environments?
Yes, the DK60Q carries a genuine, certified 6.0 tonne (6,000 kg) safe working load limit. It is engineered specifically to meet European safety standards for intensive daily use within commercial transport fleet garages, agricultural repair centres, and heavy contracting environments.

How does the quick-lift pedal benefit a fast-paced workshop environment?
The quick-lift pedal bypasses the standard handle stroke mechanism to elevate the saddle up to the heavy vehicle’s chassis immediately. This heavily reduces setup times, minimizes technician fatigue, and gets vehicles lifted and serviced much faster.

Does the frame twist or distort when lifting close to its 6,000 kg maximum load?
Not at all. Every DK60Q is constructed in Denmark using high-strength structural steel with a wide, heavily reinforced chassis frame. This premium layout entirely eliminates structural twisting or frame flexing under maximum capacity, providing a rock-solid, stable lift.

What type of lowering mechanism does this floor jack use?
It utilizes a high-precision manual dead man's release valve located inside the handle grip. This allows the mechanic to manage the lowering velocity with total accuracy, ensuring a smooth, slow, and completely predictable descent that eliminates sudden, hazardous drops.

Technical Specifications

The AC Hydraulic DK40Q delivers reliable, high-capacity lifting performance specifically optimized for fleet managers, heavy mechanics, and agricultural engineers throughout Ireland. Boasting a genuine 4.0 tonne (4,000 kg) safe lifting limit, this heavy-duty trolley jack effortlessly raises delivery commercial trucks, municipal transport vehicles, farm tractors, and rugged civil engineering machinery. Built with an exceptionally wide and robust chassis made from high-strength industrial steel, it completely eliminates frame twisting to ensure stable lifting operations in intensive workshop settings.

Versatile Working Range for Diverse Fleet Maintenance

Handling multiple vehicle classes requires flexible workshop equipment. The AC Hydraulic DK40Q addresses this with an entry profile minimum height of just 140 mm, allowing it to slide cleanly beneath heavy low-profile axles and machinery undercarriages. When pumping, the hydraulic cylinder moves smoothly up to a maximum height of 600 mm. This ample vertical range gives service technicians plenty of room to confidently execute heavy-duty brake overhauls, tyre tracking adjustments, suspension repairs, and general underbody inspections.

Advanced Dead Man Safety Controls and Overload Security

Safety is non-negotiable when working beneath large commercial loads. The DK40Q is equipped with a high-precision manual dead man's release valve inside the handle, giving the operator absolute, granular control over the lowering speed and preventing unpredictable or hazardous drops. To further safeguard your workforce and your machinery, an integrated built-in safety overload valve automatically blocks the lifting mechanism if the weight exceeds the 4,000 kg rating, ensuring a completely safe working environment.

Ergonomic Layout and Rapid Workshop Deployment

To optimize job efficiency in commercial repair bays, this hydraulic floor jack incorporates a standard quick-lift foot pedal. This feature brings the large lifting saddle up into contact with the vehicle chassis lifting spot instantly, eliminating repetitive manual handle strokes before the load engages. The unit features an ergonomically designed 950 mm handle that ensures a positive, non-slip grip, making the 95 kg jack remarkably easy to steer, position, and transport across smooth or industrial concrete surfaces.

Durable Danish Craftsmanship Built for Demanding Environments

Proudly engineered and constructed in Viborg, Denmark, the AC Hydraulic DK40Q uses only premium raw materials and hard-chromium plated hydraulic rams to prevent corrosion and premature wear. It is fully designed to deliver a long, low-maintenance service life under punishing workshop conditions. For garages operating on outdoor gravel areas or uneven service yards, the chassis can also be configured with optional high-clearance pneumatic tyres to maximize mobility across any industrial terrain.

Frequently Asked Questions (FAQ)

What is the primary application for the AC Hydraulic DK40Q?
The DK40Q is a heavy-duty 4 tonne (4,000 kg) trolley jack tailored for busy commercial vehicle garages, transport fleet workshops, and agricultural engineering yards. It safely manages delivery trucks, farm tractors, and industrial plant machinery.

What is the difference between the DK40Q and the 'HLQ' models?
The 'Q' suffix denotes a standard heavy-duty high-lift jack reaching a maximum height of 600 mm, which is ideal for standard truck axles and commercial underbodies. The 'HLQ' models feature an extended, ultra-high-lift arm setup designed to reach up to 975 mm for exceptionally tall machinery.

Will the 140 mm minimum height accommodate low commercial axles?
Yes, the 140 mm entry profile is low enough to easily roll beneath the front or rear lifting points of standard commercial vehicles, trucks, and low-clearance agricultural hitches without catching.

Does the hydraulic system protect against rusting or wear over time?
Yes. Built to withstand punishing industrial conditions, the DK40Q features a hard-chromium plated hydraulic piston ram and top-tier industrial seal kits. This construction resists corrosion, moisture, and premature wear, ensuring a lifetime of dependable performance.

Technical Specifications

The AC Hydraulic DK50HLQ is the ultimate heavy-duty workshop companion for commercial vehicle garages, agricultural engineers, and plant hire depots throughout Ireland. With a certified lifting capacity of 5.0 tonnes (5,000 kg), this commercial-grade floor jack is explicitly engineered to raise heavy transport trucks, tractors, combines, and demanding earthmoving contractors' machines. Built with an ultra-wide, heavy-gauge steel chassis, it completely eliminates structural flexing under load to provide unwavering stability during high-capacity lifts.

Exceptional Lifting Reach for High-Clearance Machinery

Servicing large-scale machinery requires heavy equipment that can deliver substantial vertical clearance. The AC Hydraulic DK50HLQ answers this demand by offering an incredible maximum lifting height of 975 mm. This extensive reach makes it simple to execute deep underbody work, major axle repairs, track servicing, and heavy tyre changes. Simultaneously, the jack maintains a low minimum profile height of just 140 mm, allowing operators to easily navigate under low-clearance structural points on commercial trailers and trailers.

Advanced Operator Safety and Fluid Lowering Control

When dealing with 5-tonne loads, workshop safety is paramount. The DK50HLQ features a highly accurate manual dead man's release mechanism within the handle assembly, guaranteeing precise, predictable, and slow lowering speeds that eliminate dangerous sudden drops. An integrated built-in safety overload valve acts as a mechanical fail-safe, preventing the hydraulic cylinder from lifting beyond safe operating limits. These industrial safety elements ensure total operator confidence during every single lift.

Ergonomic Efficiency on the Workshop Floor

To reduce technician fatigue and accelerate turnaround times in high-volume commercial bays, the DK50HLQ is equipped with a high-efficiency quick-lift foot pedal. This feature brings the large lifting saddle up to the chassis point instantly, removing the need for manual handle pumping until the load is engaged. The long 1200 mm handle is ergonomically formed to allow easy positioning and positive guidance, allowing the 170 kg unit to be directed precisely around tight workshop bays.

Danish Engineering Built to Last a Lifetime

Manufactured proudly in Denmark, the AC Hydraulic DK50HLQ utilizes premium-grade industrial steel construction and top-tier hydraulic seal kits. Its rugged design ensures complete resistance to the daily punishment of busy industrial workshops. For workshops managing external site repairs or operating on uneven outdoor surfaces, the chassis can also be configured with optional pneumatic tyres to facilitate effortless transport across outdoor yards.

Frequently Asked Questions (FAQ)

What type of machinery is the 5-tonne DK50HLQ designed to lift?
With a certified 5,000 kg capacity and a massive 975 mm lifting height, the DK50HLQ is purpose-built for heavy commercial transport trucks, agricultural tractors, combine harvesters, and civil engineering plant or contractors' machinery across Ireland.

How heavy is the jack itself, and is it easy to maneuver around the garage?
The DK50HLQ is an industrial-grade tool weighing 170 kg, reflecting its robust, high-strength steel construction. Moving it is made remarkably straightforward thanks to its wide chassis layout, heavy-duty wheels, and an ergonomically formed 1200 mm steering handle that provides excellent leverage.

Can this jack be operated safely on gravel yards or unpaved forecourts?
The standard configuration features rigid steel and polyurethane wheels intended for concrete floors. However, for agricultural or plant workshops requiring outdoor use on uneven ground or gravel, the chassis frame is fully compatible with an optional pneumatic tyre upgrade.

What safety features protect the operator when lifting heavy 5-tonne loads?
Safety is paramount: the jack is built with a manual dead man’s release system inside the handle for granular, slow, and precise lowering control. It also features an integrated safety overload valve that automatically prevents the hydraulic mechanism from executing a lift if the load exceeds 5,000 kg.

Technical Specifications

The AC Hydraulic DK20HLQ stands out as an indispensable lifting tool for professional mechanics, commercial service garages, and high-end home workshops throughout Ireland. This heavy-duty 2 tonne trolley jack is masterfully engineered with a wide, robust frame made of high-strength steel. This sturdy structural foundation completely eliminates chassis twisting under load, providing unmatched stability when lifting larger vehicles like modern SUVs, 4x4s, and commercial transit vans.

Ultra-Low Profile Combined with Maximum Lifting Reach

Finding a trolley jack that can service both low-slung sports cars and high-clearance utility vehicles can be a challenge. The AC Hydraulic DK20HLQ solves this by featuring a very low minimum height of only 80 mm, ensuring it slides effortlessly under lowered passenger cars. Once positioned under the lifting point, the hydraulic cylinder extends smoothly to a maximum height of 795 mm. This high lifting capabilities provide ample, clear workspace for detailed underbody work, tyre fitting, brake repairs, and suspension overhauls.

Advanced Safety Mechanisms and Ergonomic Operation

Safety is a foundational element of the AC Hydraulic product range. The DK20HLQ is built with a manual dead man's release valve that guarantees precise and safe control whilst lowering the vehicle, completely eliminating sudden drops. Additionally, an integrated built-in safety overload valve protects the operator and the vehicle by preventing the jack from operating beyond its safe working limit of 2,000 kg. Operation is made highly efficient thanks to the ergonomically designed handle, which ensures a positive, comfortable, and safe grip during daily workshop routines.

Fast Setup and Workshop Surface Protection

To maximize efficiency in fast-paced commercial garage environments, this high lift floor jack is fitted with a convenient quick-lift pedal. The foot-operated pedal allows you to quickly reach the vehicle’s lifting point without repetitive handle pumping. For smoother transport across the workshop, the jack features specialized noiseless wheels. These wheels incorporate a high-quality polyurethane central O-ring, which shields expensive epoxy floor coatings from scratches while delivering silent, smooth mobility across industrial surfaces.

Uncompromised Danish Quality and Durability

Every AC Hydraulic DK20HLQ trolley jack is designed and manufactured in Denmark, constructed to withstand the daily rigours of industrial environments. Utilizing high-strength steel fabrication and durable hydraulic seals, it is a long-term investment that brings maximum efficiency, exceptional durability, and uncompromising safety to your automotive maintenance and repair setup.

Frequently Asked Questions (FAQ)

What makes the DK20HLQ ideal for SUVs, 4x4s, and vans compared to standard jacks?
The DK20HLQ features an exceptionally long reach and a high lifting arm that extends up to 795 mm. Standard trolley jacks often lack the vertical reach to clear the suspension travel of high-clearance vehicles, whereas this model offers ample space to lift SUVs and light commercials completely clear of the ground.

Will the low 80 mm entry clearance fit underneath lowered sports cars?
Yes. Despite its high lifting capabilities, the frame has a highly compact, low-profile entry height of just 80 mm. This dual-capability allows you to seamlessly transition from low-clearance passenger cars to high-riding commercial vans with a single workshop jack.

Are the wheels suitable for treated or painted workshop floors?
Absolutely. The DK20HLQ is equipped with specialized noiseless wheels that incorporate a protective polyurethane central O-ring. This design ensures silent mobility and shields expensive epoxy or painted concrete floors from scratches and scoring.

Can I lift a vehicle quickly using just the handle?
You can, but to maximize efficiency, you should use the integrated quick-lift foot pedal. The foot pedal brings the lifting saddle into contact with the vehicle's chassis lifting point almost instantly, saving you from repetitive, unloaded manual handle pumping.

Technical Specifications

The EAE EE-62C 4.2T Two Post Lift  stands out as one of the most adaptable vehicle lifts on the market. Its "clear floor" design keeps the workspace between columns free of obstructions, making it easier to move toolboxes and oil drainers under the vehicle. One of its primary advantages is the flexible installation options; technicians can choose between a Symmetric or Asymmetric setup depending on the specific space requirements of their workshop.

Furthermore, the EE-62C offers adjustable installation heights. You can set the total height at either 3867mm or 4300mm, allowing you to maximize your vertical space and accommodate taller vehicles with ease. This flexibility ensures the lift grows with your business needs.

Advanced Safety and Protective Features

Safety is at the core of the EAE EE-62C design. It is fully CE certified and features a range of protective measures to safeguard both the technician and the vehicle. The integrated vehicle roof protective device prevents accidental damage to taller vehicles, while the 24V control system ensures safe operation at all times.

• Automatic Arm Locks: Arm locks engage and disengage automatically for secure positioning.
• Mechanical Safety: Includes mechanical locks and crash valves for additional layers of safety.
• Door Protection: Standard door protection pads are included to prevent scratches and dents during entry and exit.
• Aluminum Motor: High-efficiency motor designed to avoid overheating and ensure a long service life.

Robust Arm Structure and Technical Specifications

This lift is engineered for heavy use with a strong carriage and arm structure. It utilizes a combination of 3-stage short arms and 2-stage long arms, providing the reach necessary to lift various vehicle types safely and efficiently. The 100mm extensions further enhance the lift's ability to reach difficult pick-up points.

Key Product Features

• 4,200kg Lifting Capacity: Engineered with a robust 4.2-tonne capacity, making it the ideal professional solution for passenger cars, SUVs, and light commercial vehicles.
• Flexible Installation Height: Designed with an adjustable overall height of either 3867mm or 4300mm, allowing for a custom fit based on your workshop's ceiling clearance.
• Symmetric or Asymmetric Setup: Features a versatile design that can be installed in either a symmetric or asymmetric configuration without the need for additional spare parts.
• Clear Floor Workspace: The overhead bar configuration provides a completely unobstructed floor between columns, allowing for the easy movement of toolboxes and oil drainers.
• Advanced 3-Stage Arm Reach: Equipped with 3-stage short arms and 2-stage long arms to safely and precisely reach the lifting points of various vehicle wheelbases.
• Integrated Roof Protection: Includes a vehicle roof protective device that automatically stops the lift to prevent overhead damage to taller vehicles.

• Dual Safety Systems: Utilizes automatic arm locks combined with mechanical locks and crash valves for maximum operator and vehicle security during every lift.
• Industrial 24 Volt Control System: Features a professional 24V control box for safe, intuitive operation in busy Irish garage environments.
• Enhanced Cylinder Protection: Durable cylinders in each column are supported by chain protection systems and derailment prevention for long-term reliability.

• Heavy-Duty Aluminum Motor: Standard high-performance aluminum motor housing avoids overheating and ensures a long service life under constant use.
• Standard Door Protection: Fitted with door protection pads to prevent accidental contact damage when entering or exiting vehicles on the lift.

• CE Certified: Fully compliant with European safety and quality standards for professional workshop use.
• Industry-Leading Warranty: Supported by EAE’s 5/2/2 warranty program, covering the structure, hydraulics, and electrical components.

The EAE 62C-60T is the ultimate solution for professional vehicle service centers requiring superior lifting strength. Boasting a 6,000kg (6T) capacity, this lift is built to handle heavy-duty commercial vehicles, armored cars, and large transport vans with ease. Its clear-floor design provides an unobstructed workspace, allowing technicians to move oil drainers, transmission jacks, and tool trolleys freely under the raised vehicle.

Advanced Safety and Heavy-Duty Engineering

Safety and durability are at the core of the 62C-60T design. The lift features a heavy-duty carriage and reinforced arm structure to manage maximum loads securely. It is equipped with automatic arm locks that engage and disengage seamlessly, along with a vehicle roof protective device to prevent overhead damage. The high-performance aluminum motor is engineered to prevent overheating during intensive use, ensuring long-term reliability in a busy workshop environment.

Durable Construction for Irish Workshops

Built to withstand the rigors of industrial applications, the EAE 62C-60T features a durable powder-coated finish and standard door protection pads. The 24V control system is housed in a sealed unit for maximum electrical safety. Fully CE certified and backed by a comprehensive 5/2/2 warranty, this lift offers Irish garage owners peace of mind and professional-grade performance.

Key Product Features

• 6,000kg Lifting Capacity: Superior heavy-duty lifting power specifically engineered for large commercial vans and industrial vehicles.
• Clear Floor Design: Provides an unobstructed workspace, allowing for the easy movement of maintenance equipment under the raised vehicle.
• Extended Overall Height: A total height of 5051mm to accommodate taller commercial vehicles and high-roof vans.
• Industrial Strength Arms: Features a 3-stage short arm and 3-stage long arm configuration as standard for maximum reach and flexibility.
• Advanced Safety Systems: Equipped with mechanical locks, anti-surge valves, and crash valves to provide professional-grade security.
• Automatic Arm Locks: Safety locks engage and disengage automatically during operation to ensure vehicle stability.
• Overhead Protection: Includes a dedicated vehicle roof protective device to prevent accidental damage to taller vehicles.
• Heavy Duty Construction: Built with a reinforced heavy-duty carriage and arm structure for long-term durability in high-volume workshops.
• High-Performance Motor: Features a standard aluminum motor designed to prevent overheating during intensive use.
• Professional Finish: Coated in a durable powder finish with standard door protection pads to safeguard customer vehicles.
• Low Profile Access: A minimum lifting height of 110mm allows the hoist to accommodate vehicles with lower ground clearance.
• Certified Quality: Fully CE certified for use in Ireland and backed by a 5/2/2 year warranty program.

Why Upgrade to the 6-Tonne Model?

• Superior Lifting Capacity: The 62C-60T provides a massive 6,000kg (6T) capacity, offering an additional 1,000kg of lifting power for heavy-duty commercial applications.
• Increased Vertical Clearance: At 5051mm, the 6-Tonne model is exactly 600mm taller than the 5T version, making it the ideal choice for high-roof commercial vans
• Optimized Drive-Through Space: The 6-Tonne version offers a wider drive-through width of 3025mm to better accommodate broader commercial vehicle chassis.
• Versatile Precision Lifting: Despite the high capacity, both models maintain a low 110mm minimum height, ensuring they can safely service standard passenger cars and SUVs alongside heavy machinery.
• Engineered Lifting Performance: The 6T model features a controlled lifting time of approximately 55 seconds to manage heavier industrial loads securely.