1/2 stubby air impact wrench ireland mechanics choose when standard-sized impact guns simply won't fit: the PCL APP220S Prestige stubby series is purpose-built for high-demand, tight-clearance automotive maintenance. Manufactured by PCL air tools—a globally trusted name in pneumatic workshop equipment—this ultra-compact air gun combines impressive breaking force with extreme maneuverability to tackle stubborn fixings inside cramped engine compartments, wheel arches, and under-chassis areas across Ireland and Northern Ireland.

High Torque in an Ultra-Compact Frame

The standout advantage of the PCL APP220S is its short overall head length paired with a powerful jumbo hammer mechanism. Designed specifically to overcome clearance restrictions, this mini pneumatic impact wrench delivers the punch of a full-sized tool without the bulky footprint. The jumbo hammer structure provides instant, balanced impact force, allowing technicians to break loose seized suspension bolts, subframe mounts, and brake calliper bracket fixings without disassembling surrounding vehicle components.

Ergonomic Prestige Features for Restricted Spaces

Working in confined automotive spaces requires total tool control. As part of PCL’s premier Prestige line, the APP220S incorporates several user-focused ergonomics:

• Single-Handed Forward & Reverse Control: Toggling direction is seamless with a simple thumb switch, letting you operate the tool smoothly with one hand even when reaching around obstacles.
• Variable Power Settings: Multi-position power regulation helps fine-tune torque output for delicate components, protecting threads from over-torquing or snapping.
• Thermal Non-Slip Handle Grip: The ergonomic rubberized handle insulates the operator's hand against cold airflow while ensuring a secure grip when coated in workshop oil or grease.
• Base Handle Exhaust: Directs exhaust air down through the bottom of the handle, keeping debris, oil mist, and dust from blowing into your face or workspace.

Why Every Garage Needs a Compact 1/2 Air Impact Gun

Modern passenger vehicles and light commercial vans feature increasingly crowded engine bays and tightly packed undercarriages. Adding a stubby impact gun from our commercial pneumatic air tools collection to your workshop setup drastically reduces job turnaround times by eliminating the need for manual ratchet turning in tight spaces. For best results on the shop floor, pair this stubby wrench with low-profile sockets from our 1/2 drive impact sockets range and connect via high-flow pneumatic air fittings.

Key Product Features:

• Ultra-Compact Stubby Profile: Short head length engineered specifically to access restricted engine bays, wheel arches, and tight chassis quarters.

• Jumbo Hammer Mechanism: Delivers high torque output in a reduced-size body for rapid breaking power.

• Single-Handed Control: Intuitive forward/reverse switch for rapid, effortless direction toggling in awkward working angles.

• Ergonomic Soft Grip: Non-slip contoured handle provides superior operator control and thermal insulation against cold compressed air.

• Handle Exhaust: Directs working compressed air safely down through the base of the handle, keeping dust away from the operator.

• Prestige Range Build: Heavy-duty construction designed for continuous commercial garage and automotive repair environments.

Technical Specifications

1/2 air impact wrench ireland technicians choose for ultimate power and reliability: the PCL APP201 Prestige series air gun is specifically engineered to handle demanding workshop, tyre depot, and bodyshop tasks. Manufactured by PCL air tools—a globally trusted name in pneumatic innovation—this flagship model combines high power-to-weight performance with smooth operational balance to effortlessly remove stubborn wheel bolts, suspension fasteners, and structural fixings throughout Ireland and Northern Ireland.

Advanced Twin Hammer Impact Wrench Mechanism

At the center of the PCL APP201 is an advanced twin hammer impact wrench mechanism designed for rapid torque generation and maximum service life. Unlike single-hammer mechanisms, the twin-hammer design strikes simultaneous blows from both sides of the anvil, producing consistent, balanced breaking force with reduced internal vibration. This makes the 1/2 drive pneumatic impact gun an exceptional choice for continuous bolt removal without subjecting the technician to unnecessary operator fatigue.

Ergonomic Prestige Design for Daily Professional Use

As part of PCL’s top-tier Prestige range, the APP201 is crafted for mechanics who demand comfort alongside uncompromised performance. Essential design features include:

• Multi-Speed Power Regulation: Integrated torque regulator allows precise power adjustment in forward and reverse, helping prevent stripped threads or over-tightened fixings.
• Ergonomic Non-Slip Grip: Soft-touch contoured handle provides outstanding control and insulation against cold compressed air, even when operated with oily hands.
• Through-Handle Rear Exhaust: Directs expelled air down through the base of the handle, keeping oil and dust blowing away from the working area and the operator’s face.
• Optimal Balance & Weight: Precision-balanced housing reduces wrist strain during prolonged tyre service or overhead vehicle servicing.

Why Invest in PCL Prestige Air Tools for Your Garage?

Upgrading your workshop equipment with items from our full commercial pneumatic air tools collection ensures minimal tool downtime and greater operational productivity. PCL’s Prestige series is engineered specifically for severe-service automotive environments, offering enhanced durability over standard air tools. For best results on the shop floor, pair this impact wrench with high-impact sockets from our 1/2 drive impact sockets range and connect via high-flow pneumatic air couplings.

Key Product Features:

• Twin Hammer Mechanism: Engineered for smooth, balanced, and rapid power delivery under heavy daily automotive loads.

• Prestige Range Quality: Premium-grade construction providing high reliability and extended working service life.

• Ergonomic Design: Features a non-slip, comfortable pistol grip to minimize hand fatigue during continuous workshop use.

• Controllable Power Settings: Adjustable forward and reverse regulator settings for precise torque application.

• Handle Exhaust: Directs working compressed air safely down through the handle and away from the operator.

• Lightweight & Durable Housing: Built with a rugged, lightweight composite/aluminium casing for optimal working balance.

Technical Specifications

3/4 air impact wrench ireland professionals rely on for high-demand tasks: the PCL APT230 is built to handle the toughest commercial garage, agricultural, and industrial maintenance jobs. Manufactured by PCL, a global leader in pneumatic equipment, this unit combines exceptional breaking power with user-focused ergonomics to tackle seized nuts, commercial truck wheels, and heavy structural fixings across Ireland and Northern Ireland with absolute reliability.

High-Torque Power: 1350 Nm Impact Wrench Capability

At the core of the PCL APT230 is an engineered power plant delivering up to 1350 Nm of maximum torque and a free speed of 4,000 RPM. This 1350 Nm impact wrench provides the raw breaking force required to remove rusted fasteners without stalling under load. Utilizing a robust pin clutch hammer mechanism, this 3/4 drive impact wrench delivers smooth power transmission with minimal vibration feedback to the operator's hands.

Designed for Daily Workshop Efficiency & Operator Comfort

The PCL APT230 functions as a versatile, heavy duty air impact wrench optimized for continuous use in busy vehicle depots, transport hubs, and equipment repair facilities. Key features include:

• Single-Handed Control: Switch between forward and reverse directions effortlessly with one hand for speed and convenience on multi-fastener jobs.
• Multi-Speed Settings: Features 3 forward and 3 reverse impact power settings, helping prevent thread damage or over-tightening on sensitive components.
• Ergonomic Non-Slip Grip: Soft-touch rubber handle ensures maximum operator control, even when working with oily or greasy hands during long shifts.
• Rear Exhaust System: Directs compressed air down through the handle and away from the user and workpiece to reduce dust and noise disturbance.

Why Choose PCL Pneumatic Equipment for Your Garage?

Investing in professional-grade air tools is essential for minimizing downtime in commercial workshops. The PCL brand represents decades of engineering excellence, ensuring that every tool meets rigorous safety, durability, and performance standards. Whether you are servicing heavy goods vehicles, maintaining public transport fleets, or managing a busy agricultural machinery repair yard, the APT230 delivers the dependable pneumatic output necessary to boost daily workshop productivity.

Key Product Features:

• High Torque Output: Delivers up to 1,350 Nm of maximum power for demanding heavy-vehicle and industrial applications.

• Durable Pin Clutch Mechanism: Designed for smooth operation, longevity, and high performance under heavy daily workshop use.

• Single-Handed Control: Features an intuitive single-handed direction change for rapid switching between forward and reverse modes.

• Multi-Speed Settings: Equipped with 3 forward and 3 reverse operating impact power settings for enhanced application precision.

• Ergonomic Design: Fitted with a comfortable non-slip grip and rear handle exhaust to direct air away from the workspace and operator.

• Heavy-Duty Construction: Built with an aluminium body offering an ideal balance between rugged durability and manageable weight (4.5 kg).

Technical Specifications

Engineered for high-demand commercial maintenance and heavy repair work, the Kuani KI-30 is a high-performance 3/4 inch super duty air impact wrench built to tackle stubborn, high-torque fasteners. Whether servicing medium-duty trucks, farm equipment, or industrial machinery, this pneumatic tool delivers exceptional output in a maneuverable pistol-grip body.

High-Torque Twin Hammer Mechanism

At the core of the Kuani KI-30 is its heavy-duty Twin Hammer clutch mechanism operating at a free speed of 6,500 RPM. Capable of generating up to 1,100 ft-lb (1,491 Nm) of working torque in reverse within 5 seconds, this 3/4 air impact wrench easily breaks loose seized chassis bolts, hub assemblies, and heavy machinery fasteners.

Rugged Construction & Ergonomic Control

Demanding workshop conditions require tools built to last. The Kuani KI-30 features a rugged metal housing that protects internal components while maintaining an operational weight of 4.54 kg (10.0 lbs). Featuring a twin hammer impact wrench 3/4 drive setup with an integrated forward/reverse regulator, technicians gain precise control across every application.

Built for Ireland's Garages & Workshops

Ideal for commercial tire bays, fleet maintenance depots, and agricultural engineers across Ireland, the Kuani KI-30 is a reliable heavy duty air impact wrench Ireland technicians rely on. Its balanced design, standard 3/8" air inlet, and side exhaust system ensure efficient, long-term performance on the shop floor.

Key Product Features

• Heavy-Duty Torque Output: Generates up to 1,100 ft-lb (1,491 Nm) of working torque at 5 seconds for commercial repairs.
• Twin Hammer Mechanism: Operates at 6,500 RPM free speed for rapid, balanced hitting power.
• Rugged Metal Housing: Durable alloy casing built for high-frequency workshop use as a 3/4 inch super duty air impact wrench.
• Multi-Speed Power Regulator: Provides positive forward power settings and full power in reverse for accurate control.
• Commercial Air Requirements: Runs at standard 90 psi (6.2 bar) operating pressure with a 3/8" air inlet and 1/2" ID hose.

Technical Specifications

Engineered for high-frequency shop use and automotive maintenance, the Kuani KI-853 is a professional-grade 1/2 inch super duty air impact wrench built to deliver consistent breaking power. Whether servicing passenger vehicles, light commercial fleets, or farm machinery, this pneumatic tool delivers reliable torque in a compact, rugged frame.

High-Torque Twin Hammer Mechanism

At the heart of the Kuani KI-853 is a heavy-duty Twin Hammer clutch mechanism operating at a free speed of 8,000 RPM. Capable of generating up to 600 ft-lb (813 Nm) of working torque in reverse within 5 seconds, this 1/2 air impact wrench makes quick work of stubborn, rusted, or over-torqued wheel nuts and suspension bolts.

Rugged All-Metal Construction & Precision Control

Demanding garage environments require tools that endure heavy daily use. The Kuani KI-853 features an all-metal housing that protects internal components while maintaining an operational weight of 2.56 kg (5.64 lbs). Featuring an ergonomic pistol grip and integrated forward/reverse power control, operators maintain full control across every application.

Built for Ireland's Garages & Workshops

Ideal for commercial garages, tire bays, and plant fitters across Ireland, the Kuani KI-853 is a dependable heavy duty air impact wrench Ireland technicians rely on. Its balanced design, standard 1/4" air inlet, and easy maintenance ensure long-term productivity on the job.

Key Product Features

• Super Duty Torque Performance: Delivers up to 600 ft-lb (813 Nm) of maximum working torque in reverse at 5 seconds for demanding automotive and shop applications.

• Twin Hammer Clutch Mechanism: Engineered with a robust Twin Hammer drive system operating at 8,000 RPM free speed for rapid, high-impact force.

• Compact All-Metal Construction: Heavy-duty steel and alloy housing provides extreme durability and resistance against shop drops and chemicals.

• Multi-Speed Power Regulator: Features positive forward power settings and full power in reverse for precise torque management.

• Comfort & Control: Ergonomic pistol grip design ensures excellent balance and comfortable handling during extended daily use.

• Standard Air Requirements: Operates efficiently at 90 psi (6.2 bar) operating pressure with a 1/4" air inlet and 3/8" recommended hose inner diameter.

Technical Specifications

Designed for demanding industrial, fleet, and commercial tire applications, the Kuani KI-36-6 is a high-performance 1 inch extended anvil air impact wrench built to deliver extreme breaking power. Whether servicing commercial fleet vehicles, agricultural machinery, or heavy plant equipment, this heavy-duty pneumatic tool provides dependable performance across Irish workshops.

6-Inch Extended Anvil for Deep-Dish Wheels

Equipped with a 6-inch extended square drive anvil, this 1 inch heavy duty air impact wrench solves access challenges on commercial vehicles. The added reach allows mechanics to service lug nuts on deep-dish dual wheels, bus axles, and recessed trailer hubs directly, eliminating the need for extra extensions.

Pinless Hammer Clutch Mechanism

At the core of the Kuani KI-36-6 is a Pinless Hammer mechanism operating at a free speed of 4,000 RPM. Capable of generating up to 1,800 ft-lb (2,441 Nm) of working torque in reverse within 5 seconds, this commercial air impact tool 1 inch model delivers rapid impact power to break loose stubborn, corroded, or over-torqued fasteners.

Ergonomic D-Handle Design & Precision Control

Maintaining full control over high-torque output is essential for operator safety. The Kuani KI-36-6 features a heavy-duty rear D-handle trigger combined with a side assist handle, giving technicians maximum leverage and stability during heavy use. With 3 forward power settings and full power in reverse, operators can easily match the output to the job requirements.

Built for Commercial Tire Shops & Truck Maintenance

Ideal for commercial tire bays, fleet maintenance depots, and agricultural engineers, the Kuani KI-36-6 is a reliable truck tyre air impact wrench. Its heavy-duty metal housing and high-torque mechanism make it an essential tool for high-frequency daily use across Ireland.

Key Product Features

• Heavy-Duty Torque Output: Generates up to 1,800 ft-lb (2,441 Nm) of working torque at 5 seconds for tough fleet maintenance.
• 6-Inch Extended Drive Anvil: Reaches deep-dish truck wheels and recessed fasteners without energy loss.
• Pinless Hammer Mechanism: Delivers smooth, hard-hitting impact force with enhanced durability under high loads.
• Ergonomic D-Handle & Side Support: Provides maximum leverage and balance for a 1 inch extended anvil air impact wrench.
• 3-Speed Power Regulator: Offers 3 forward power settings and full power in reverse for accurate torque management.
• Commercial Air Requirements: Runs at standard 90 psi (6.2 bar) operating pressure with a 1/2" air inlet and 1/2" ID hose.

Technical Specifications

Engineered for demanding industrial, fleet, and workshop applications, the Kuani KI-32 is a high-performance 1 inch pistol grip air impact wrench built to deliver extreme breaking power. Whether servicing commercial fleet vehicles, heavy machinery, or agricultural equipment, this pneumatic tool provides consistent, heavy-duty torque in a comfortable pistol-style design.

Heavy-Duty Commercial Air Impact Tool 1 Inch Performance

When you need a durable commercial air impact tool 1 inch drive size for challenging jobs, the Kuani KI-32 provides the exact power required. Built with an ergonomic pistol-grip housing, this 1 inch heavy duty air impact wrench delivers exceptional operator leverage and balance, allowing technicians to work efficiently without excess strain.

High-Torque Twin Hammer Mechanism

At the heart of the Kuani KI-32 is its New Twin Hammer clutch mechanism operating at a free speed of 4,000 RPM. Capable of generating up to 1,800 ft-lb (2,441 Nm) of working torque in reverse within 5 seconds, this 1 inch pistol grip air impact wrench quickly loosens seized, corroded, or over-torqued fasteners in busy Irish workshops.

Precision Control & Ergonomic Design

Maintain precise control over your fastening jobs with 3 forward power settings and full power in reverse. Weighing 7.21 kg (15.9 lbs) with an overall length of 230 mm (9.1 inches), the Kuani KI-32 offers an outstanding power-to-weight ratio for a 1-inch drive tool. The side exhaust system directs air away from the working environment to keep your site clear.

Built for Commercial Tire Shops & Truck Maintenance

Ideal for commercial tire bays, fleet service centers, and agricultural mechanics across Ireland, the Kuani KI-32 is a reliable truck tyre air impact wrench. Its heavy-duty construction and high impact power make it a long-lasting investment for demanding commercial shop use.

Key Product Features

• Heavy-Duty Torque Output: Generates up to 1,800 ft-lb (2,441 Nm) of maximum torque at 5 seconds for demanding commercial applications.
• Ergonomic Pistol Grip Design: Provides maximum user control and leverage for a 1 inch pistol grip air impact wrench.
• Twin Hammer Mechanism: Driven by a New Twin Hammer clutch system running at 4,000 RPM free speed for rapid impact hitting power.
• 3-Speed Power Regulator: Integrated 3 forward settings with full power in reverse for accurate speed and torque adjustment.
• Commercial Air Requirements: Works efficiently at standard 90 psi (6.2 bar) operating air pressure with a 1/2" air inlet and 1/2" ID hose.

Technical Specifications

Engineered for high-frequency industrial, fleet, and tire shop applications, the Kuani KI-1838A-6 is a heavy-duty 1 inch long anvil air impact wrench that provides extreme loosening and tightening performance. Designed to tackle heavy commercial vehicles, buses, agricultural machinery, and industrial plant equipment, this pneumatic tool delivers exceptional torque in a maneuverable, lightweight design.

6-Inch Extended Anvil for Hard-to-Reach Fasteners

Equipped with a 6-inch extended square drive anvil, this 1 inch composite air impact wrench solves clearance issues on commercial vehicles. The added length lets operators easily reach lug nuts on deep-dish dual wheels, recessed trailer hubs, and enclosed framework without requiring energy-dampening extension bars.

High-Torque Twin Hammer Performance

At the core of this premium 1 inch long anvil air impact wrench is a robust Twin Hammer clutch mechanism operating at 5,000 RPM free speed. Capable of delivering up to 2,000 ft-lb (2,712 Nm) of working torque within 5 seconds, the Kuani KI-1838A-6 makes short work of seized, rusted, or high-torque fasteners in commercial workshops across Ireland.

Lightweight Composite Design & Precision Control

Industrial 1" air tools are typically heavy and tiring to operate. Designed as an efficient commercial air impact tool 1 inch drive size, the Kuani KI-1838A-6 features an advanced composite housing that keeps total weight down to 8.1 kg (17.86 lbs) while maintaining structural durability. Coupled with an ergonomic pistol-style handle and a 3-position power setting switch, technicians gain full control and reduced fatigue throughout long working shifts.

Built for Commercial Tire Shops & Truck Maintenance

Ideal for commercial tire bays, fleet service centers, and heavy equipment mechanics, the Kuani KI-1838A-6 offers an outstanding power-to-weight ratio. As a premier truck tyre air impact wrench, it provides the durability and sustained breaking power needed to keep commercial vehicles moving efficiently across Ireland.

Key Product Features

• Heavy-Duty Torque Output: Generates up to 2,000 ft-lb (2,712 Nm) of maximum torque at 5 seconds for demanding commercial applications.
• 6" Extended Drive Anvil: Built with a 6-inch extended anvil, making reach-in access to deep-dish truck wheels and heavy vehicle chassis straightforward.
• Lightweight 1 Inch Long Anvil Air Impact Wrench Design: High-strength 1 inch composite air impact wrench construction weighing just 8.1 kg (17.86 lbs) minimizes operator fatigue during extended shop use.
• Twin Hammer Mechanism: Utilizes a Twin Hammer clutch drive system running at 5,000 RPM free speed for rapid, balanced hitting power.
• 3-Speed Power Regulator: Integrated 3-position forward/reverse power settings allow precise torque management across varying commercial jobs.
• Commercial-Grade Air Requirements: Uses a standard 1/2" air inlet and 3/4" ID air hose running at 90 psi (6.2 bar) operating pressure.

Technical Specifications

Designed for high-frequency industrial and automotive maintenance, the Kuani KI-1636 3/4 composite air impact wrench provides heavy-duty power in an exceptionally balanced package. Whether servicing commercial fleet vehicles, agricultural machinery, or heavy plant equipment, this pneumatic tool delivers consistent torque and reliability under rigorous daily use.

Advanced Twin Hammer Power & Performance

At the heart of the Kuani KI-1636 3/4 air impact wrench is its New Twin Hammer clutch mechanism. This drive design delivers rapid, hard-hitting impacts with minimal vibration, enabling the tool to reach up to 1,300 ft-lb (1,763 Nm) of working torque in reverse within 5 seconds. Running at a free speed of 6,500 RPM, it makes quick work of stubborn, rusted, or over-torqued fasteners.

Ergonomic Lightweight Composite Construction

Heavy air tools can cause significant operator fatigue over extended working periods. As a premium 3/4 composite air impact wrench, the KI-1636 addresses this with an advanced composite housing and ergonomic pistol grip handle, keeping the total unit weight down to just 3.89 kg (8.58 lbs). The compact overall length of 225 mm (8.9 inches) offers enhanced maneuverability in tight work spaces without sacrificing structural durability.

Precision Control & Rear Exhaust Design

Maintain complete control over your fastening operations with 3 positive forward power settings and full un-restricted power in reverse. For a cleaner and quieter working environment, the rear exhaust system with built-in muffler redirects air and debris away from your face and work surface.

Built for Ireland's Commercial Garages & Industrial Workshops

Suitable for high-frequency shop use, the Kuani KI-1636 offers straightforward maintenance and exceptional service life. Its high power-to-weight ratio makes it a dependable choice for commercial mechanics, tire fitters, and agricultural engineers across Ireland looking for a reliable 3/4 composite air impact wrench.

Key Product Features

• 3/4" Drive High Torque Performance: Delivers up to 1,300 ft-lb (1,763 Nm) of working torque in reverse at 5 seconds for demanding fastening and loosening tasks.

• Twin Hammer Clutch Mechanism: Engineered with a New Twin Hammer mechanism for balanced impacts, rapid performance, and long-term durability.

• Lightweight 3/4 Composite Air Impact Wrench: Composite handle reduces user fatigue (3.89 kg / 8.58 lbs) while maintaining high structural strength for heavy daily shop use.

• 3-Speed Power Regulator: Features 3 positive forward power settings and full power in reverse for precise control across various commercial applications.

• Operator Comfort & Quiet Operation: Integrated rear exhaust with muffler directs air away from the workspace and helps lower noise output.

• Commercial Grade Specs: Operates at 6,500 RPM with standard 90 psi (6.2 bar) operating air pressure for commercial garages, plant maintenance, and agricultural machinery.

Technical Specifications

Built for Ireland's Commercial Garages & Industrial Workshops

Suitable for high-frequency shop use, the Kuani KI-1636 offers straightforward maintenance and exceptional service life. Its high power-to-weight ratio makes it a dependable choice for commercial mechanics, tire fitters, and agricultural engineers across Ireland looking for a reliable 3/4 composite air impact wrench.

Whether you are breaking loose stubborn lug nuts on cars and commercial vans or servicing heavy machinery components, this 1/2" air wrench provides the raw power required to complete demanding shop jobs efficiently and reliably day in, day out.

Heavy-Duty Twin Hammer Mechanism

At the core of the Aircat UT1150 impact wrench is a rugged twin hammer clutch system designed to deliver fast, powerful impact blows directly to the anvil. This hard-hitting mechanism maximizes energy transfer, ensuring that rusted, over-torqued, or corroded fasteners break free with minimal effort from the operator.

The integrated multi-position power management system gives mechanics complete speed and torque control. Located conveniently on the rear cap, the power dial allows you to select lower torque settings for delicate reassembly or max power for stubborn removal tasks, helping prevent accidental cross-threading or overtightening.

Lightweight Composite Housing for Operator Comfort

Continuous use of traditional heavy metal air wrenches can lead to fatigue, wrist strain, and decreased productivity over long shifts. The Aircat UT1150 impact wrench solves this by utilizing a modern high-strength composite housing. The lightweight body reduces physical strain without sacrificing structural strength or impact resistance against accidental shop drops.

Beyond weight savings, the composite material naturally damps vibration and insulates the operator's hand from the cold air flowing through the tool housing. This allows mechanics to work more comfortably during continuous service work in cool workshop environments across Ireland.

Ergonomic Design & Quiet Shop Operation

AIRCAT tools are world-renowned for prioritizing technician health and ergonomic design. The Aircat UT1150 impact wrench features an ergonomically molded pistol-grip handle complete with textured, non-slip inserts. This grip design improves tool handling and control even when working with oily or gloved hands.

In addition, the tool is built with AIRCAT's patented tuned exhaust system. By channeling spent air out through the bottom of the handle away from the user and dampening exhaust noise, the Aircat UT1150 impact wrench operates at significantly lower decibel levels than conventional pneumatic wrenches—creating a safer, quieter working environment in busy commercial garages.

Versatile 1/2" Drive Performance for Irish Garages

Equipped with a standard 1/2" square drive anvil with socket retainer ring, the Aircat UT1150 impact wrench is fully compatible with standard metric and imperial impact sockets. It is an ideal addition for automotive repair shops, agricultural workshops, maintenance departments, and serious automotive enthusiasts across Ireland demanding professional pneumatic reliability.

Key Product Features

• High Torque Performance: Delivers superior torque output for heavy automotive, commercial garage, and maintenance tasks.

• Lightweight Composite Body: High-strength composite housing minimizes weight to significantly reduce wrist and arm fatigue during extended use.

• Twin Hammer Clutch Mechanism: Durable internal mechanism delivers fast, hard-hitting impact blows for removing stubborn or rusted fasteners.

• Ergonomic Pistol Grip: Molded, non-slip textured handle provides maximum grip, balance, and control in oily workshop conditions.

• Tuned Exhaust System: AIRCAT patented exhaust technology muffles noise output while directing spent air away from the technician.

• Rear Speed & Direction Dial: Convenient rear-mounted power management dial and forward/reverse control for smooth operation.

Technical Specifications