Powered through a high-quality 196cc petrol engine, this open frame generator is protected by a heavy-duty steel tubular frame, delivers dual voltage output, and is fitted with oil and fuel resistant anti-vibration mounts and two large, robust rubber wheels.

Key Features

• Powered by 4-stroke engine

• Easy pull recoil start

• Pure sine wave inverter technology

• 230V socket

• 5V DC output (USB)

• Ideal for commercial environments, construction sites and equipment hire

• Compatible with E5 and E10 fuel

Box Contents

• 1 x Spark plug spanner

Technical Specifications

Powered through a high-quality 196cc petrol engine, this open frame generator is protected by a heavy-duty steel tubular frame, delivers dual voltage output, and is fitted with oil and fuel resistant anti-vibration mounts and two large, robust rubber wheels.

Key Features

• Powered by 4-stroke engine

• Easy pull recoil start

• Steel tubular frame

• Dual voltage output (230V / 110V)

• 12V DC output

• Fitted with oil and fuel resistant anti-vibration mounts and two wheels

• Compatible with E5 and E10 fuel

Box Contents

• 1 x Spark plug spanner

• 1 x 12V Charging lead

• 4 x Spanners

Technical Specifications

This 3800W open frame inverter generator is powered through a high-quality 212cc petrol engine protected by a heavy-duty steel tubular frame. Attached is an easy pull recoil start mechanism. This petrol generator delivers 230V AC and 5V DC output (via USB). It features pure sine wave inverter technology capable of providing clean and stable running of sensitive electrical and electronic equipment such as laptops, microwave ovens, induction hobs and TVs. It is fitted with oil and fuel resistant anti-vibration mounts and wheel kit for ease of mobility. The 5.0 hour (100% load) continuous running time and strong frame makes this generator ideal for commercial environments, construction sites and equipment hire. Supplied with a spark plug spanner and combination spanners. Compatible with E5 and E10 fuel.

Key Features

• Powered by 4-stroke engine

• Easy pull recoil start

• Pure sine wave inverter technology

• 2 x 230V sockets

• 2 x USB sockets

• Compatible with E5 and E10 fuel

Box Contents

• 1 x Spark plug spanner

• 4 x Spanners

Technical Specifications

The Dynomec DY2300-C New Locking Wheel Nut Remover Setnew  represents the next generation of wheel fastener removal. Designed and manufactured entirely in-house, this all-inclusive kit contains everything professional technicians need to deal with virtually any locking wheel nut or bolt on the market. Housed in a portable carry case complete with a removable LDP foam insert, it is fully optimized for on-the-go service vehicles and busy commercial garage environments.

Advanced Innovation with Peak Drive C-Blades

At the core of the DY2300-C system are advanced engineering innovations, including Peak Drive C-Blades and a large selection of mouldable attachments. These components shape directly into the complex internal profiles of stubborn wheel nuts to create a custom temporary key. Combined with multi-patented chisel blades and screw-in adaptors that maximize rigidity and stability, the kit ensures high-efficiency performance on every job.

Precision Engineering and Enhanced Safety Features

Safety and build quality take center stage in the DY2300-C design. The kit features a patented multi-function Dual Strike Impact Driver that isolates linear driving forces independent of rotational forces, complete with a high-visibility green mode indicator band. Furthermore, multi-size protective shrouds safeguard wheel rims from damage while aiding centralization, and a removable stainless steel hand protection ring with a foam cushion ensures full-circle hand protection for the user.

Fleet and Trade Approved Reliability

Engineered for heavy-duty daily use, the DY2300-C wheel tool is trusted by major roadside recovery patrols and master technicians nationwide. Every individual component is laser-engraved for clear identification and easy repeat ordering, ensuring seamless maintenance of your toolkit. Backed by a limited 5-year warranty and built to exacting British manufacturing standards, it provides ultimate peace of mind for professional mechanics and industrial workshops across Ireland.

Key Product Features:

• Worldwide multi-patented all-inclusive set designed to tackle virtually any locking wheel nut on the market

• Features Peak Drive C-Blades and mouldable attachments for superior grip into complex internal profiles

• Includes a patented multi-function Dual Strike Impact Driver with linear and rotational force isolation

• Multi-size protective shrouds reduce wheel damage risk while aiding centralization

• Comes in a portable carry case with a removable LDP foam insert and includes a limited 5-year warranty

The Dynomec DY1000 locking wheel nut remover is the legendary original tool designed over 25 years ago. Built on a proven track record of success, it has served countless professional mechanics and vehicle recovery specialists in seamlessly overcoming difficult locking wheel nuts. Its enduring design and robust build quality make it a staple asset in workshops and commercial garages looking for dependable service tools.

Precision British Manufacturing and Build Quality

Every DY1000 tool benefits from 100% in-house production standards. From initial CAD design to precision CNC machining and final assembly, every stage of manufacturing is strictly controlled to ensure optimal durability and performance. Designed and manufactured in the UK, this service tool meets rigorous industry standards, giving technicians the confidence needed for intensive, day-in and day-out operations.

Fleet and Trade Approved for Heavy-Duty Use

Engineered to withstand the demanding conditions of commercial environments, the DY1000 wheel nut tool is fleet and trade approved. It is widely trusted by major roadside recovery patrols and thousands of master technicians nationwide. Whether you operate a bustling commercial garage, an industrial workshop, or a professional mobile recovery service, this tool delivers the rugged reliability required to keep workflows moving efficiently.

Reliable Performance for Professional Workshops

When dealing with stubborn or damaged fasteners, having the right service tool is crucial. The Dynomec DY1000 streamlines the wheel nut removal process, minimizing vehicle downtime and maximizing shop productivity. Backed by decades of industry experience, it remains a trusted, tried-and-tested solution for professionals across Ireland who demand uncompromising quality and long-lasting durability from their workshop equipment.

Key Product Features:

• Original locking wheel nut remover design trusted for over 25 years
• Fleet and trade approved, engineered for heavy-duty daily use
• Designed and manufactured in-house in the UK with precision CNC machining
• Trusted by major roadside recovery patrols and master technicians nationwide
• Robust build quality designed for commercial garages and industrial workshops

The EAE E25M is an independent two column vehicle lift engineered for garages, commercial workshops, and industrial facilities that need dependable, high-capacity lifting without the hassle of steel ropes or synchronized cabling. Its wireless synchronized hydraulic control system automatically corrects height variations during lifting cycles, keeping both columns perfectly level throughout every lift.

Rated to lift up to 5000kg, the E25M comfortably handles sedans, heavy-duty SUVs, pickup trucks, and vans, making it a versatile choice for busy Irish workshops and home garages alike.

Key Technical Specifications

• Lifting Capacity: 5.0T (5000kg)
• Max Lifting Height: 2000mm
• Min Height: 110mm
• Lifting Time: Approximately 25 seconds
• Motor: Dual power units, 3.5kW x 2
• Drive-Through Width: 2430–3130mm
• Inside Column Width: 2800–3500mm (recommended installation range)
• Overall Height: 2912mm
• Electricity Supply: Configured per customer requirements

Wireless, Independent Column Design

Unlike traditional two post lifts that rely on steel ropes for synchronization, the E25M uses a wireless synchronized hydraulic control system. Each column operates independently, reducing mechanical wear and simplifying installation, while the system automatically corrects any height variation between columns as it lifts.

Smart Control and Monitoring

The E25M features a touchscreen HMI display for real-time height monitoring and system setup, with an optional weight indicator available. A dedicated height limit switch and displacement sensor work alongside an intelligent control system to ensure accurate, consistent lifting on every cycle. All electrical operation runs on a 24V safe control system.

Built-In Safety Features

• Dual safety protection against hydraulic leakage via mechanical latch and anti-burst hydraulic valve
• Smart latch sensors that determine whether to lower directly or raise before descent
• Low-position stop with audible alarm for final travel
• Automatic engaging and disengaging swing arm locking device — engages when raised, disengages at the lowest position
• CE certified for compliance and peace of mind

Four 3-Stage Arms and Optional Type M Arms

The E25M is fitted with four 3-stage lifting arms as standard, offering flexible pickup point positioning for a wide range of vehicle types. For workshops handling vehicles with extended or unusual wheelbases, optional Type M Arms are available to extend wheelbase compatibility further.

Efficient, Low-Maintenance Motor

Powered by dual 3.5kW motors housed in an aluminium shell, the E25M dissipates heat rapidly for consistent performance even during repeated, heavy-duty use — delivering a full lift from bottom to top in approximately 25 seconds under rated load.

Who Is the EAE E25M For?

The E25M is suited to home users seeking a professional-grade home garage lift, as well as commercial garages and industrial workshops that need a durable, high-capacity two post lift for daily use. Its flexible installation width (recommended 2800–3500mm) allows it to be configured to suit a range of installation spaces.

Note: Max lifting height is measured with adjustable screw pads in the highest position. Product shown may include optional equipment; actual appearance may differ slightly.

Key Features

• Rated lifting capacity of 5000kg (5.0T) — suitable for sedans, heavy-duty SUVs, pickup trucks, and vans
• Wireless synchronized hydraulic control system with automatic height correction
• Independent columns — no steel ropes
• Maximum lift height of 2000mm for greater under-vehicle workspace
• Dual 3.5kW power units — full lift in approximately 25 seconds
• Touchscreen HMI display with optional weight indicator
• 24V safe control system
• Dual hydraulic safety protection (mechanical latch + anti-burst valve)
• Automatic swing arm locking device
• Four 3-stage arms, with optional Type M arms available
• CE certified
• Flexible installation width: 2800–3500mm recommended

Technical Specifications

* Machine shown with optional equipment. Actual product appearance may differ.
* Max. Lifting height is measured with adjustable screw pads in highest position.

As automotive service requirements evolve, workshop equipment must meet the precise demands of servicing electric and hybrid vehicles. The EAE MS10 EV battery lifting table is purpose-built to facilitate the safe removal, transportation, and installation of heavy EV battery packs, engines, gearboxes, drive axles, and suspension assemblies.

Versatile & Adjustable Mobile Lifting Table

Designed for maximum efficiency, the working table extends from 1305mm up to 1480mm in length to comfortably accommodate larger battery packs and long chassis components. Equipped with two independent precision screws controlled by T-handles, operators can easily tilt the working table to align perfectly with the mounting angle of the vehicle[cite: 1].

The top surface features a 100mm x 100mm grid of M10 threaded holes for attaching specialized component fixtures, alongside dedicated side mounting points for securing loads with straps

Smooth Pneumatic-Hydraulic Operation

Powered by a foot-activated pneumatic-driven hydraulic pump (operating at 6–8 bar air pressure), the EAE MS10 allows hands-free elevation up to a maximum lifting height of 1800mm. Premium hydraulic cylinders and high-grade seal rings ensure smooth, controlled movements, dynamically tested under 115% of rated load capacity

Durable Design for Irish Workshops

Built on an oversized base frame for optimal stability, this 1T mobile lift table features four heavy-duty, abrasion-resistant lockable casters for easy maneuverability across workshop floors. A durable powder-coated finish protects the unit against peeling and corrosion in demanding garage environments.

Key Features

• 1.0 Tonne Lifting Capacity: Engineered for heavy-duty lifting including EV battery packs, engines, gearboxes, drive axles, and suspension systems.

• Foot-Activated Pneumatic-Hydraulic Pump: Powered and controlled effortlessly via a foot-operated air-hydraulic pump (requires 6–8 bar air supply).

• Extendable & Tiltable Platform: Features a flexible table length extending from 1305mm to 1480mm and independent twin-screw tilt adjustment.

• Integrated Fixture Points: Includes a grid of 100mm x 100mm reserved mounting holes (104-M10) to secure specialized fixtures and side strap points for stable load fixing.

• Heavy-Duty Mobility: Fitted with four robust, abrasion-resistant lockable casters for smooth maneuverability and secure positioning.

• Maximum Stability & Safety: Dynamic overload tested to 115% of rated capacity with high-quality seals, cylinders, and a wide base frame.

Technical Specifications

* Machine shown with optional equipment. Actual product appearance may differ.

1/2 stubby air impact wrench ireland mechanics choose when standard-sized impact guns simply won't fit: the PCL APP220S Prestige stubby series is purpose-built for high-demand, tight-clearance automotive maintenance. Manufactured by PCL air tools—a globally trusted name in pneumatic workshop equipment—this ultra-compact air gun combines impressive breaking force with extreme maneuverability to tackle stubborn fixings inside cramped engine compartments, wheel arches, and under-chassis areas across Ireland and Northern Ireland.

High Torque in an Ultra-Compact Frame

The standout advantage of the PCL APP220S is its short overall head length paired with a powerful jumbo hammer mechanism. Designed specifically to overcome clearance restrictions, this mini pneumatic impact wrench delivers the punch of a full-sized tool without the bulky footprint. The jumbo hammer structure provides instant, balanced impact force, allowing technicians to break loose seized suspension bolts, subframe mounts, and brake calliper bracket fixings without disassembling surrounding vehicle components.

Ergonomic Prestige Features for Restricted Spaces

Working in confined automotive spaces requires total tool control. As part of PCL’s premier Prestige line, the APP220S incorporates several user-focused ergonomics:

• Single-Handed Forward & Reverse Control: Toggling direction is seamless with a simple thumb switch, letting you operate the tool smoothly with one hand even when reaching around obstacles.
• Variable Power Settings: Multi-position power regulation helps fine-tune torque output for delicate components, protecting threads from over-torquing or snapping.
• Thermal Non-Slip Handle Grip: The ergonomic rubberized handle insulates the operator's hand against cold airflow while ensuring a secure grip when coated in workshop oil or grease.
• Base Handle Exhaust: Directs exhaust air down through the bottom of the handle, keeping debris, oil mist, and dust from blowing into your face or workspace.

Why Every Garage Needs a Compact 1/2 Air Impact Gun

Modern passenger vehicles and light commercial vans feature increasingly crowded engine bays and tightly packed undercarriages. Adding a stubby impact gun from our commercial pneumatic air tools collection to your workshop setup drastically reduces job turnaround times by eliminating the need for manual ratchet turning in tight spaces. For best results on the shop floor, pair this stubby wrench with low-profile sockets from our 1/2 drive impact sockets range and connect via high-flow pneumatic air fittings.

Key Product Features:

• Ultra-Compact Stubby Profile: Short head length engineered specifically to access restricted engine bays, wheel arches, and tight chassis quarters.

• Jumbo Hammer Mechanism: Delivers high torque output in a reduced-size body for rapid breaking power.

• Single-Handed Control: Intuitive forward/reverse switch for rapid, effortless direction toggling in awkward working angles.

• Ergonomic Soft Grip: Non-slip contoured handle provides superior operator control and thermal insulation against cold compressed air.

• Handle Exhaust: Directs working compressed air safely down through the base of the handle, keeping dust away from the operator.

• Prestige Range Build: Heavy-duty construction designed for continuous commercial garage and automotive repair environments.

Technical Specifications

1/2 air impact wrench ireland technicians choose for ultimate power and reliability: the PCL APP201 Prestige series air gun is specifically engineered to handle demanding workshop, tyre depot, and bodyshop tasks. Manufactured by PCL air tools—a globally trusted name in pneumatic innovation—this flagship model combines high power-to-weight performance with smooth operational balance to effortlessly remove stubborn wheel bolts, suspension fasteners, and structural fixings throughout Ireland and Northern Ireland.

Advanced Twin Hammer Impact Wrench Mechanism

At the center of the PCL APP201 is an advanced twin hammer impact wrench mechanism designed for rapid torque generation and maximum service life. Unlike single-hammer mechanisms, the twin-hammer design strikes simultaneous blows from both sides of the anvil, producing consistent, balanced breaking force with reduced internal vibration. This makes the 1/2 drive pneumatic impact gun an exceptional choice for continuous bolt removal without subjecting the technician to unnecessary operator fatigue.

Ergonomic Prestige Design for Daily Professional Use

As part of PCL’s top-tier Prestige range, the APP201 is crafted for mechanics who demand comfort alongside uncompromised performance. Essential design features include:

• Multi-Speed Power Regulation: Integrated torque regulator allows precise power adjustment in forward and reverse, helping prevent stripped threads or over-tightened fixings.
• Ergonomic Non-Slip Grip: Soft-touch contoured handle provides outstanding control and insulation against cold compressed air, even when operated with oily hands.
• Through-Handle Rear Exhaust: Directs expelled air down through the base of the handle, keeping oil and dust blowing away from the working area and the operator’s face.
• Optimal Balance & Weight: Precision-balanced housing reduces wrist strain during prolonged tyre service or overhead vehicle servicing.

Why Invest in PCL Prestige Air Tools for Your Garage?

Upgrading your workshop equipment with items from our full commercial pneumatic air tools collection ensures minimal tool downtime and greater operational productivity. PCL’s Prestige series is engineered specifically for severe-service automotive environments, offering enhanced durability over standard air tools. For best results on the shop floor, pair this impact wrench with high-impact sockets from our 1/2 drive impact sockets range and connect via high-flow pneumatic air couplings.

Key Product Features:

• Twin Hammer Mechanism: Engineered for smooth, balanced, and rapid power delivery under heavy daily automotive loads.

• Prestige Range Quality: Premium-grade construction providing high reliability and extended working service life.

• Ergonomic Design: Features a non-slip, comfortable pistol grip to minimize hand fatigue during continuous workshop use.

• Controllable Power Settings: Adjustable forward and reverse regulator settings for precise torque application.

• Handle Exhaust: Directs working compressed air safely down through the handle and away from the operator.

• Lightweight & Durable Housing: Built with a rugged, lightweight composite/aluminium casing for optimal working balance.

Technical Specifications

3/4 air impact wrench ireland professionals rely on for high-demand tasks: the PCL APT230 is built to handle the toughest commercial garage, agricultural, and industrial maintenance jobs. Manufactured by PCL, a global leader in pneumatic equipment, this unit combines exceptional breaking power with user-focused ergonomics to tackle seized nuts, commercial truck wheels, and heavy structural fixings across Ireland and Northern Ireland with absolute reliability.

High-Torque Power: 1350 Nm Impact Wrench Capability

At the core of the PCL APT230 is an engineered power plant delivering up to 1350 Nm of maximum torque and a free speed of 4,000 RPM. This 1350 Nm impact wrench provides the raw breaking force required to remove rusted fasteners without stalling under load. Utilizing a robust pin clutch hammer mechanism, this 3/4 drive impact wrench delivers smooth power transmission with minimal vibration feedback to the operator's hands.

Designed for Daily Workshop Efficiency & Operator Comfort

The PCL APT230 functions as a versatile, heavy duty air impact wrench optimized for continuous use in busy vehicle depots, transport hubs, and equipment repair facilities. Key features include:

• Single-Handed Control: Switch between forward and reverse directions effortlessly with one hand for speed and convenience on multi-fastener jobs.
• Multi-Speed Settings: Features 3 forward and 3 reverse impact power settings, helping prevent thread damage or over-tightening on sensitive components.
• Ergonomic Non-Slip Grip: Soft-touch rubber handle ensures maximum operator control, even when working with oily or greasy hands during long shifts.
• Rear Exhaust System: Directs compressed air down through the handle and away from the user and workpiece to reduce dust and noise disturbance.

Why Choose PCL Pneumatic Equipment for Your Garage?

Investing in professional-grade air tools is essential for minimizing downtime in commercial workshops. The PCL brand represents decades of engineering excellence, ensuring that every tool meets rigorous safety, durability, and performance standards. Whether you are servicing heavy goods vehicles, maintaining public transport fleets, or managing a busy agricultural machinery repair yard, the APT230 delivers the dependable pneumatic output necessary to boost daily workshop productivity.

Key Product Features:

• High Torque Output: Delivers up to 1,350 Nm of maximum power for demanding heavy-vehicle and industrial applications.

• Durable Pin Clutch Mechanism: Designed for smooth operation, longevity, and high performance under heavy daily workshop use.

• Single-Handed Control: Features an intuitive single-handed direction change for rapid switching between forward and reverse modes.

• Multi-Speed Settings: Equipped with 3 forward and 3 reverse operating impact power settings for enhanced application precision.

• Ergonomic Design: Fitted with a comfortable non-slip grip and rear handle exhaust to direct air away from the workspace and operator.

• Heavy-Duty Construction: Built with an aluminium body offering an ideal balance between rugged durability and manageable weight (4.5 kg).

Technical Specifications